Experience Learning and Taking the B2 Driver's License Exam From A - Z

Learning and taking the B2 driver's license exam is not an easy process, requiring learners to have perseverance, effort and careful preparation. To pass the exam, you need to master the necessary driving knowledge and skills.

In this article, City Driving Test & Training Center. Ho Chi Minh City will share experiences in studying and taking the B2 driver's license exam from A - Z, helping you prepare well for the exam and achieve the desired results.

1. What is a B2 driver's license? 

The B2 driver's license is the most popular type of driver's license today, allowing you to drive more types of vehicles than the B1 license. Specifically:

  • 9-seat passenger car (including the driver's seat).
  • Special-use cars are designed with a tonnage of less than 3,5 tons.
  • Trucks include specialized trucks designed with a tonnage of less than 3,5 tons.
  • Tractors that tow a trailer are designed to have a tonnage of less than 3,5 tons.
B2 license qualifies you to use many types of vehicles
B2 license qualifies you to use many types of vehicles

2. Experience learning and taking the B2 driver's license exam from A - Z

2.1. Experience studying and taking the theory test for a B2 driver's license

The basic B2 driving theory content includes the following parts:

  • Chapter 1: Content about concepts and rules when participating in road traffic (Number: 166 sentences).
  • Chapter 2: Content about Transport operations (Number: 26 questions).
  • Chapter 3: Cultural content in traffic and moral awareness of drivers (Number: 21 sentences).
  • Chapter 4: Content about driving techniques (Number: 56 sentences).
  • Chapter 5: Content on how to structure and repair vehicles (Number: 35 sentences).
  • Chapter 6: Content about the system of road signs (Number: 182 sentences).
  • Chapter 7: Content about traffic situations and skills for handling situations when participating in traffic (Number: 114 sentences).
  • Chapter 8: Content about situations causing serious unsafety in traffic, also known as the "critical" content group (Number: 60 sentences).

The conditions to pass the theory test are:

Candidates taking the B2 theory exam are required to answer 32/36 questions correctly. In particular, do not answer incorrectly questions in the "crippled points" content group.

Students are taking the B2 theory test (Illustration)
Students are taking the B2 theory test (Illustration)

To study and review the theory thoroughly, you need to pay attention to:

  • Download the set 600 theory questions for the car driving license test issued by the Ministry of Transport and reviewed many times.
  • Pay attention to the set of 60 scoring questions, you should do them over and over again to master them, because if you do just one wrong question you will fail.
  • Prioritize taking the practice test on the computer multiple times to get familiar with the machine's operation and time the test.
  • Proactively ask the teacher difficult questions. If you understand the nature, it will be easier for you to pass the exam.

Experience in taking the B2 driver's license theory test:

You need to carefully check the necessary documents (CCCD, exam fee receipt) and registration number before entering the exam room. In addition, keep a strong mentality to do the test. If you carefully review the set of 600 theory questions, this exam will not be too difficult for you.

2.2. Experience learning and taking the B2 driver's license simulation test

According to Circular 38/2019/TT-BGTVT, from January 1, 1, all driving testing centers need to be equipped with software to simulate traffic situations and cabins to train drivers. for students.

Driving license simulation device B2
Driving license simulation device B2

Learning and exam content with the B2 simulation device includes:

  • Basic exercises on how to operate vehicle gears, practicing uphill gear, perpendicular roads, winding roads, etc.
  • Advanced exercises with driving skills on hilly terrain, highways, city roads,...

In particular, the simulation device also provides warnings about dangers, going in the wrong lane, etc. and integrates weather conditions for learners to improve their skills in handling situations. This helps learners recognize basic elements of terrain and situations while experiencing authentic driving, gaining driving sense and skills, minimizing unsafe situations in practice.

The content of the car driving test using simulation software includes 10 situations (in a set of 120 simulation situations), each situation has a maximum score of 5 points. If the candidate scores 35/50, he/she passes and can continue to take the exam.

Some situations in the simulation test:

Situation - Vehicles entering the main road from a branch road
Situation – Vehicles entering the main road from a branch road
Situation - Crossing lanes to overtake vehicles
Situation – Crossing lanes to overtake vehicles
Situation - Avoid motorbikes making reckless turns
Situation – Avoid motorbikes making reckless turns
Situation - Pedestrians crossing the street
Situation – Pedestrians crossing the street
Situation - Pedestrians cross the street behind a truck
Situation – Pedestrians cross the street behind a truck

B2 simulation exam experience:

  • Study in groups of situations:
    • When you see the car in front braking and the rear light is on, press the space bar.
    • If you see another vehicle approaching and starting to encroach on the lane, press the button.
    • While at a deserted intersection, a car stuck its head out and immediately clicked.
    • The car in front signals to change lanes.
    • When an unexpected situation occurs that causes danger, press the button.
  • Study each chapter, mastering the simulated situations of each location.
  • Practice continuously to remember and create habits.
  • Try to learn to understand instead of "memorizing by rote", avoiding the case of poor psychology and easily confusing questions with similar contexts.
  • You should adjust the time correctly to press the space, normally simulation exam software will have noise, if you press too fast you will easily get a score of 0.
  • ...

> See details: The most detailed guide to preparing for the B2 driver's license simulation exam

2.3. Experience in learning and taking the driving test with a B2 driver's license

Contents of learning and driving test with B2 driver's license

The driving test will include 11 tests on equipment vehicles, including:

  • Lesson 1: Starting out.
  • Lesson 2: Stop the car to give way to pedestrians.
  • Lesson 3: Stopping and starting a vehicle on a slope (depa).
  • Lesson 4: Go through tire tracks on narrow, perpendicular roads.
  • Lesson 5: Go through an intersection with traffic control signals.
  • Lesson 6: Winding roads.
  • Lesson 7: Reverse the car into a parking space (reverse the barn).
  • Lesson 8: Pause at a place where a railway passes by.
  • Lesson 9: Changing numbers on a straight line.
  • Lesson 10: Match the car horizontally to the parking spot.
  • Lesson 11: Reaching the finish line
  • Additional exam: Instructions for handling dangerous situations.
The test of stopping and starting a vehicle across a slope (Illustration)
The test of stopping and starting a vehicle across a slope (Illustration)

Candidates must achieve at least 80/100 points to pass and practice driving on the road.

Experience of taking the driving test with a B2 driver's license:

When preparing to depart
  • Adjust the seat to suit yourself.
  • Check steering operations, brakes, throttle, clutch,...
  • Check the rearview mirror so that you can observe the point where the wheel is in contact with the road surface.
  • Fasten your seat belt, start the engine and wait for the test command.
Back the car into the correct parking space (Illustration)
Back the car into the correct parking space (Illustration)
When you start receiving orders to take the exam, you will start:
  • Turn on the left turn signal to start entering the test lane.
  • Go into gear 1, release the clutch slowly to let the car start running.
  • When you leave the starting line about 5m, turn off the turn signal.
  • When you are going steady, release the clutch completely to let the car run evenly.
When on the road
  • Yield to pedestrians: Just control the vehicle to a stop, making sure that the 2 front driving wheels are positioned in the middle of the 2 lines. If there is an order, continue.
  • Through the tire tracks, the road is narrow and perpendicular: You must adjust your posture to lean completely against the chair and align so that the 3 points are in line: Center of the chest - Center of the steering wheel - any point you choose to use as a landmark on the image. The driver should let the front and rear wheels of the co-driver's side pass through the tire track area, then take the vehicle's benchmark and drive slowly through the narrow perpendicular road and turn the steering wheel correctly to complete. During the implementation process, the vehicle speed needs to be kept at 1 rpm.
  • Enter the winding road: Must remember the motto "when going forward, remember to stick to your back, when going back, stick to your belly".
  • Enter the ramp: When the vehicle has passed the pedestrian line, you should turn the throttle deeply. If the vehicle approaches the stop line about 10m, shorten the clutch and gradually apply the brake until it reaches 1000 rpm. When moving the vehicle up, quickly brake into position. gas, release the handbrake and add more gas to let the vehicle crawl over the slope. Continue repeating again to complete the test.
Test for cars to stop on a slope (Illustration)
Test for cars to stop on a slope (Illustration)
  • Through the intersection area: When encountering a signal, you must stop the vehicle about 1 meter from the yellow line, then cut the clutch. When you see a red light indicating that you have 2 seconds left, open the clutch and continue moving.
  • Back the car into the parking area: To park the car according to standard standards, determine that the car is about 45 degrees from the parking lot door, then fully depress the clutch and engage reverse gear while turning the steering wheel to the left (only 1,5 turns). When you see that the mirror arm is level with the parking space, it means it is balanced with the parking space. At this time, you turn the steering wheel to the right about 1,5 turns and let the car reverse slowly until you hear a beep and stop braking. This process requires diligent practice to achieve the best results.
  • At the location where the railway runs through: Align with the secondary mirror on the left side, at the point where the eye - the bottom edge of the mirror - the stop sign connect into a straight line, press the clutch and brake to stop the car.
  • Change numbers on the line: Release the clutch and brake, step on the accelerator slowly to gradually go faster past the 20km/h sign. Immediately after that, you must press the clutch and brake to decelerate the car. When it's about to stop, start shifting back to 1st gear.
  • Pair the car horizontally: Adjust your shoulders, firmly turn the steering wheel all the way to your right hand and slowly back the car into the parking space until the car is at a 45 degree angle with the sidewalk to meet the standard.
When reaching the finish line:

At the finish line, you must turn on the turn signal to finish the test, otherwise 5 points will be deducted.

When encountering dangerous situations:

When encountering a dangerous situation, you must press the clutch and brake quickly for 3 seconds and turn on the emergency lights.

2.4. Experience learning and taking the road driving test with a B2 driver's license

Contents of learning and taking the road driving test with B2 driver's license

Start up

Prepare yourself to be as comfortable as possible. Then do the following:

  • Check the exterior and interior parts of the vehicle.
  • Perform these operations:
    • Sit on the seat and adjust the distance, tilt, and height of the driver's seat to make it most comfortable and suitable.
    • Check whether the seat belt's elasticity and latch are adequate, pull the strap from the shoulder to the waist and install the latch.
    • Check whether the vehicle's equipment is closed or whether the battery indicator light, check engine light, oil indicator light, etc. are red.
    • Note the viewing angle, redefine the mirror system and car lights to ensure operation.
  • When hearing the starting signal, the contestant slowly releases the clutch to let the car start moving. Then quickly press the accelerator to accelerate the car, press the clutch, shift to number 2 and then slowly release the clutch; Continue to press the accelerator to make the car roll faster and shift into gear 3. In the starting event, the contestant must turn into gear 1, 2, and 3 within the first 15 meters of the road. If candidates do not fill in number 3, 5 points will be deducted.
Road driving test with B2 license (Illustration)
Road driving test with B2 license (Illustration)
Decrease number, increase number:

Candidates need to know how to increase and decrease numbers depending on the situation. If the car is shifting to 4th gear, hearing the downshift signal, the candidate will reduce the clutch, shift to 3rd gear, and slightly reduce the throttle to slow the car down. Similarly, if the car is in 3rd gear, shift to 2nd gear.

End:

The total distance of the road driving test is 2.000m. When hearing the signal ending the test, the candidate immediately turns on the right turn signal and parks the car. On the sidewalk, shift to neutral and pull the handbrake.

In this part, test takers must control the car, handle traffic situations that occur on the road and follow the examiner's commands. Candidates who achieve a minimum of 80/100 points will be recognized for admission and granted a B2 driving license.

Experience in taking the road driving test with a B2 driver's license

Get familiar with the car while the engine is off: Get familiar with the car while the engine is off, you will have time to carefully learn each part and their uses, and focus on practicing holding the steering wheel, gear lever, brake pedal,... so that you are familiar and skilled.

Experience in taking the road driving test with a B2 driver's license
Experience in taking the road driving test with a B2 driver's license

A car has 2 basic parts:

  • Exterior parts include the hood, grille, windshield, rearview mirrors, etc.
  • Interior parts include steering wheel, joystick, speedometer, gear lever, handbrake control lever, accelerator pedal, brake pedal, clutch/clutch pedal, lever switch water.
  • Practice in open fields with few people passing by.
  • When starting, release the clutch slowly and cross the starting line within 30 seconds.

In addition, psychology is a very important issue when taking the exam, you need to prepare a strong, confident mentality and remember to always respect the examiner and other students!

2.5. Content of the driving license exam

Starting from May 1, 5, Vietnam Road Administration and the Department of Transport regulate the content of the driving license exam including 2021 parts: Theory test; Test software to simulate traffic situations; Practice illegal driving; Practice driving on the road.

Recognition of results for candidates taking the B2 Driver's License test:

  • If you do not pass the theoretical content, you will not take the car driving test using simulation software.
  • If you do not pass the car driving test using the simulation software, you will not be able to take the practice test in the picture.
  • If you do not pass the probationary practice content, you will not be allowed to take the on-road driving test.
  • Passing the theoretical content, simulation software, and driving practice in pictures but not passing the on-road driving test results will have the results reserved for one year.

HCM Driving Training & Testing School - Prestigious, Cheap Address to Learn and Take Driver's License Tests

Studying for the B2 diploma is not as difficult as many people mistakenly think, as long as you are fully equipped with knowledge, practice hard, and gain experience from your predecessors, you can safely pass the exam with ease.

If you are looking to study and take the full B2 license test in HCM but have not found a reputable facility with a good price, then the HCM Driving Training & Testing School is worth a look.

HCM Driving Training & Testing School - Prestigious, Cheap Address for Learning and Taking Driver's License Tests
HCM Driving Training & Testing School - Prestigious, Cheap Address to Learn and Take Driver's License Tests

Reasons to choose to study and take the B2 driver's license test at the City Driver Training Center. HCM:

  • The curriculum is continuously updated - according to the law.
  • Spacious practice area, equipped with a new driving training system, ensuring safety.
  • Full package of fees at good prices, no hidden fees.
  • The staff advises carefully and is full of information.
  • Enthusiastic teachers, dedicated and thoughtful instructors.
  • Online support is extremely fast and convenient.
  • Practical lessons will receive pick-up and drop-off at many locations throughout the city, helping to save travel time for students.
  • Training time is flexible depending on the student's conditions.

In particular, for many years, the School has always been among the top training and education addresses A1 motorbike driving license test, A2 motorbike test , and GPLX B1, B2 test, Take the test with a class C truck,... is highly appreciated by many students for the quality of professional services.

Hopefully these Experience of Studying and Taking the B2 Driver's License Exam From A - Z from the Center, you will grasp some important knowledge and successfully pass the martial arts. If you have questions about the courses, contact the hotline number of HCM Driving Training & Testing School for answers and professional support.

5/5 - (1 votes)
Comparison of Driving License - How to get international driving license in vietnam:
Call Now Button