And now, the big Thai would like to share with you a button, and the one that many people ask is the gear lock lever at position P its name is the shift lock button.
What is this button for? This button is for use in the case that when my car runs out of water, then I can brake it even if I can't move the gear lever to position P. Here Thai assumes this situation. And now the key is in hand and there are no keys in the lock. Then I sat on the Camri.
See Articles Safe Driving Technique
In case my car is out of water, it is like Thai does not turn the switch, so even if I step on the brake, I cannot move the shift lever out of position P. Can you see it? And the peculiarity of an automatic transmission is that when the shift lever is in the P position, it will lock the wheels. So if I let go, I could not move the car. The situation poses that the car I parked here is out of space and behind it some of the cars that people want to get out. Did I park in the yard? What do people want to do? Did people wait for their car to have electricity back to normal before they could get out? In a situation like this, I have to have some way for me to move my car. I push my car away to avoid hindering others. So any automatic transmission must have this mechanical lock button or this shift lock button. In those situations, I press it down and I move the shift lever.
Please watch it! Press to position N. And now we move the gear lever to position N and then it will no longer lock the 2-wheel drive. We let go of our hands and we have to move the car to our own discretion. The type of shift lock just now, Thai big shared with you on the car on the 2008 Camry and some of the automatic transmission lines of 2008 and earlier life that you often ask. For now, the shift lock buttons do not bulge like this. Big Thai will share more with you.
And now big Thai will share with you the most popular form of shift lock nowadays on newer cars like the Vios car on showroom here. Similar to the last case. Now we can't move the shift lever because we're assuming the car runs out of the car without turning on the key, right? The current shift lock button on newer cars makes it more charming. It sounds down and it has no pressing. This case is sparingly used so in case of necessity we use it by having a screw or a sharp object similar to this one. And be careful we wrap the tape on the screw like the big Thai is doing. To prevent scratches. Here. Pick it up. Very simple.
Can you see it? This is its cap. We pry the lid up and stick this screw in this hole and press down. Can you see it? And press down on this and then we stop moving the shift lever to N. Remember to go back to N guys. There. Do you find it simple? And after we move the car, we return and we push the lid back.
By the way, when I mentioned this shift lock button, I reminded you that this shift lock button in case the car I need to not run has to pull the car, I bring it to N to pull the car. And also by the way, the towing of a car is automatically different from that of a manual transmission.
- The best way is you call an ambulance and transport your car to the dealership.
- The second way, you pull the car but ask the rescuers to bring a rescue base for drag vehicles as shown. That is, they put their car on that sole. That base had 4 wheels that landed and they pulled away, their wheels did not have any wheels to roll along.
- Some rescuers do not use this base, but they are quite professional, I also know to observe. They will only give 2 passive cakes to the ground and 2 active ones, it will still have a gap. As such, the wheel does not spin so it will not transmit back the force pulling back the gearbox and will not affect the transmission. If you look at the picture, you can see why there is a wheel that pulls the gap between the front wheels and the rear car.
- And finally, in the case of opposing people, we could not find the 3 options above. Forcing to drag my car ie my 4 wheels it lands and is pulled by another vehicle, in this case I take to N. And with automatic gear you should remember the speed limit Running speed should not exceed 50km / h. Remember, do not exceed 50km / h. Because if you drag like that, the wheels will spin and it will transfer it back to the gearbox. And the gearbox does not work at this time, so it does not work, so there is no lubricant, so if running at high speed, it will burn the father and damage the automatic transmission of his car.
And now, some of the notes that are often encountered with first-time automatic transmission users. For example, if the problem does not work, the problem does not explode or the key is not drawn with the automatic transmission. Although it is not damaged at all. The first error is that the key cannot be pulled out. Suppose the big Thai driver drove home to the parking lot once and turned off the key and pulled the key out. Pull out the key and don't open it. Completely impossible to draw. When you guys meet this case. You look down and look at the Thai numerical hand to see where it is located. And obviously its digital hand is in position D. Right, guys. Because it's located at position D, you can't pull the key out.
When you encounter this situation, there's nothing you need to worry about or call for help to pull back. Many people think their car is broken. You need to observe the gear before Thai. And return to position P and pull out the key. Do you find it simple? And now the big Thai would like to simulate the situation of just walking into the gas station. Turn off the engine and get off the gas station and go up. Thread machine. Pedal brake still not. In this case, you still keep looking down on the gear lever. Well we need a gear in position D. Position D is a position with numbers. That's why if we can set a machine to be dangerous, right? That is the principle of the designer. Therefore, it is impossible to start the device.
So we draw one thing is that in the case if we need the numbers to be in the right number position, then we cannot set the machine as position D, position M, position R. Question The question is, how many positions can we put the device on? The answer is we have 2 positions. 1 is that we put it at position P, that means it's parked. 2 is the position N. Ok. As you know we put in position N position P are 2 positions we can start the machine. However, the question is whether we have to brake or not? The answer is that with automatic transmissions and the engine key, we don't need to brake. As long as the gear lever is in P and N position, we can start the engine. However, the manipulation of Thailand's usual routine is to climb on the automatic gear to win countless machines. That is a habit. This is a good habit. Because there are some customers due to this habit, when buying a car to return. A customer wondered if this car had a problem or not, and I did not step on the brake pedal, but I could still start the engine. Thought the car was faulty.
As for smart car keys, automatic gearboxes, and smart keys, you have to step on the brakes to start the engine. 1 more small idea for you guys. Hope this video is more or less sharing with you some little things. Thank you for supporting the great Thai channel during the past time. In case you want to buy a car, please contact the Thai Sales Manager, Toyota Asta Fukushima. Hello and see you again.