Method of calculating the volume:
Motorbike: Cylindrical volume = Bottom area * Height
Unit: cc = cm3 = ml
The bit height or stroke is the distance from the upper dead point (DCT) to the lower dead point (DCD) as the cardboard bit moves.
Bottom area = (concrete bit radius)2*
1.5-liter Toyota Vios engine:
1.5l = 1.5dm3 = 1500cm3 = 1500cc
There are two parts to the breast: cheeks and hands
There are cylindrical pegs between the hands and the cheeks, this one is called accumulators, then the pitch means to move these pins away from the axis of the cheek.
The point is B, A is the center of the cheek, the step is to increase the distance AB, the length of the tree will increase the stroke of the cardboard bit, thereby increasing the working volume of the cardboard bit and it will increase the capacity. . Dueling can be made to add thicker cheeks to increase inertia force when spinning, increase the toss, then the car will have more force and larger torque. Ditch can be sting.
Raffle left: It means replacing the concrete bit and replacing the cylinder with a larger diameter type, increasing the bottom area of the concrete bit and increasing the volume of the combustion chamber.
Both pedestrian and left thrust have the purpose of increasing the working volume of the cardboard bit, increasing the power as well as the torque of the car to make the car more powerful.
See More Articles Along News Share Shares
Peeling is when the car is dry, viscous (lacking lubrication and heat dissipation function), in the position of the hands, the hot cheeks expand and tighten together and cannot move anymore. .
Pressing is often done when turning new plants, leveling and using hydraulic machines to press.
When the car is peeled off, also use a hydraulic machine to remove the roller bearing and replace the new roller bearing and then press it again.
Lupbe machine means that cardboard bits that are stuck in the cylinder can no longer move up and down can cause broken arms, bent hands. Lupbe happens when the car is dry, viscous dry, it increases the friction so that the concrete bit and the cylinder are unable to move, it breaks the concrete ball, breaks the cylinder ball, destroys the tree. So change oil and coolant on time.